Hioki 3535

Measurement parameters

|Z|, |Y|, θ, Rp, Rs (ESR), G, X, B, Cp, Cs, Lp, Ls, D (tanδ), Q

Measurement range

1 k/10 k/100 kΩ (Depend on the 9700-10, All parameters defined by |Z|)

Extent of measurement impedance (Note: All measurement ranges except for |Z| are for reference only)

1 kΩ range

10 kΩ range

100 kΩ range

Z, R

100 mΩ to 2 kΩ

1 kΩ to 20 kΩ

10 kΩ to 300 kΩ

C

0.66 pF to 15.9 μF

0.066 pF to 1.59 nF

4.4 fF to 159 pF

L

0.133 nH to 3.18 mH

1.33 μH to 31.8 mH

13.3 μH to 477 mH

θ

-180.00° to 180.00°

Basic accuracy

|Z|: ±0.5 % rdg., phase angle: ±0.3° (typ.)

Measurement frequency

100 kHz to 120 MHz (100 Hz to 100 kHz steps)

Measurement signal level

5 mV to 1 V, 20 mA max. (100 kHz to 10.00 MHz)
5 mV to 500 mV, 10 mA max. (10.01 MHz to 120 MHz), (1 mV steps)
200 µA to 20 mA: 1 V max. (100 kHz to 10.00 MHz)
200 µA to 10 mA: 0.5 V max. (10.01 MHz to 120 MHz), (10 µA steps)

Output impedance

50 Ω (at 100 kHz)

Display

LCD with backlight display, 99999 (3, 4, or 5 digits unit setting possible)

Measurement time

6 ms (nominal)

DC bias

N/A

Functions

Load compensation function, Classification (BIN) Measurement, Comparator, Averaging, External input/Output (EXT. I/O), GP-IB or RS-232C interface

Power supply

100V to 240 V AC, 50/60 Hz, 50 VA max.

Dimensions and mass

360mm (14.17in) W × 130mm (5.12in) H × 360mm (14.17in) D, 8.3kg (292.8oz)

Accessories

Quick start manual × 1, Instruction manual × 1, Power cord × 1